-
Smart sensor
Smart sensor
SSE-GM2DPBB-E3
Power supply voltage: 10...30 VDC（ Ripple P-P：＜10%）
Output type: PNP
Output method: NO/NC
Detection distance: 2 m
Spot size: ≤60mm@2m
Current consumption: ＜25mA
| Power supply voltage | 10...30VDC（ Ripple P-P：＜10%） |
| Output Type | PNP |
| Output method | NO/NC |
| Detection distance | 2m |
| Spot size | ≤60mm@2m |
| Consumption of current | ＜25mA |
| Load current | 200mA |
| Pressure drop | ≤1.5V |
| Light source type | Blu-ray (460 nm） |
| Protection circuit | Short circuit protection, polarity protection, overload protection |
| Indicator light | Green: Power indication;Yellow: Output indication, overload indication |
| Response time | ＜0.5ms |
| Distance adjustment | The product faces the reflector, press the button 2...5 s, Yellow lights and green lights with 4 Hz The flashes synchronously, and the lift distance is set successfully;Yellow lights and green lights with 8 Hz Asynchronously flashes, setting fails, distance becomes maximum |
| NO/NC adjust | Press the button 5...8 s, The yellow light and the green light are 2 at the same time Hz Flashing, status switching is completed |
| Resistant to ambient light | Sunlight ≤10，000Lx； Incandescent lamp ≤3，000Lx |
| Operating temperature | ﹣25...55 ºC（ No condensation or icing) |
| Storage temperature | ﹣30...70 ºC |
| Vibration resistance | 10...55Hz, Double amplitude 0.5 mm （X、Y、Z 0.5 hours in each direction) |
| Impact resistance | 500m/s²，X、Y、Z 3 times in each direction |
| High pressure resistance | 1000V/AC 50/60Hz 60s |
| Protection level | IP67 |
| Product Certification | CE |
| Housing material | PC+ABS |
| lens | PMMA |
| Connection method | M8 Connector |
| weight | 10g |
| appendix | Installation bracket ZJP-8、 Instructions for use, TD-09A Reflector |
Product Center
Contact Us
![]()
Phone: 400-651-9299
![]()
Phone: 183-0770-7777
![]()
Mail: poodel@126.com
![]()
Address: Block 22301-1771, Building 14, No. 498 Guo Shoujing Road, China (Shanghai) Pilot Free Trade Zone
Copyright © poodel lens
support: Ripple